Advanced Wireless Communications MINI PRO Uživatelská příručka stáhnout pdf (Strana 255)

● In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum

distance of 20 cm (8 inches) or more from the body of all persons.

● High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at

a minimum distance of 30 cm (12 inches) or more from the body of all persons. Please contact your professional

installer, VAR, or antenna manufacturer for proper installation requirements.

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or

in an explosive environment unless the device has been modified to be qualified for such use.

Antenna Warnings

Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended that when the Intel(R) PRO/

Wireless 2915ABG Network Connection adapter is installed in a desktop or portable computer, the antenna for this device

be installed so as to provide a separation distance of al least 20 cm (8 inches) from all persons. It is recommended that the

user limit exposure time if the antenna is positioned closer than 20 cm (8 inches).

Warning: Intel(R) PRO/Wireless LAN products are not designed for use with high-gain directional antennas. Use of

such antennas with these products in a manner other than as described in the previous section titled, “Antenna Use” is

illegal.

Use On Aircraft Caution

Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their

signals could interfere with critical aircraft instruments.

Other Wireless Devices

Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or

other devices in the wireless network.

Local Restrictions on 802.11a, 802.11b, and 802.11g Radio Usage

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, and 802.11g wireless LAN devices may not

yet be harmonized in all countries, 802.11a, 802.11b, and 802.11g products are designed for use only in specific countries,

and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are

responsible for ensuring that the products are used only in the countries for which they were intended and for verifying

that they are configured with the correct selection of frequency and channel for the country of use. The device transmit

power control (TPC) interface is part of the Intel(R) PROSet/Wireless WiFi Connection Utility. Operational restrictions for

Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible

power and frequency settings for the country of use is an infringement of national law and may be punished as such.

For country-specific information, see the additional compliance information supplied with the product.

Wireless Interoperability

The Intel(R) PRO/Wireless 2915ABG Network Connection adapter is designed to be interoperable with other wireless LAN

products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following

standards:

● IEEE Std. 802.11b compliant Standard on Wireless LAN.

● IEEE Std. 802.11g compliant Standard on Wireless LAN.

● IEEE Std. 802.11a compliant Standard on Wireless LAN.

● Wireless Fidelity (Wi-Fi) certification, as defined by the Wi-Fi Alliance

The Intel(R) PRO/Wireless 2915ABG Network Connection Adapter and Your Health

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 284 285

Žádné komentáře

Advanced Wireless Communications MINI PRO Uživatelská příručka Strana 255